Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 333)

Chapter
20
Publication 2711-6.0
Terminal and Communication
Setup
This chapter describes how to set communication and operating
parameters for the PanelView terminal. It contains the following
sections:
Section Page
Terminal Setup Overview 20–2
Defining DH-485 Communications 20–3
Defining DH+ Communications 20–5
Defining DF1 Communications 20–7
Defining Remote I/O Communications 20–9
Defining Block Transfers 20–11
Configuring the Printer Port 20–13
Changing the Terminal Type 20–15
Setting Power-up Options 20–17
Setting Time/Date Format 20–19
Setting Advanced Terminal Options 20–21
Setting a Display Maintenance Schedule 20–23
Defining PLC/SLC Control Tags 20–24
Defining Status Tags 20–26
Note: For details on configuring DeviceNet and ControlNet
communications, see the following publications:
•
DeviceNet Communications for PanelView terminals
Publication 2711–6.0.4
•
ControlNet Communications for PanelView terminals
Publication 2711–6.10
Chapter Objectives