Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 103)

6–17 Working with Applications and Screens
Publication 2711-6.0
This section shows how to move screens from one application to
another using the Cut and Paste commands on the Edit menu. Only
one application can be open in the workspace but you can run
multiple sessions of PanelBuilder.
See page 6–18 for details on what to do when copying or moving a
screen to an application that was created for a different type of
terminal.
To move screens from one application to another:
1. Select the screens to move from the application file window.
2. Click the Cut tool on the tool bar or choose Cut Screen from the
Edit menu.
PanelBuilder removes the screen from the file and puts it
on the clipboard.
3. Save the application file (if necessary).
4. Close the application file.
Or start another session of PanelBuilder.
5. Open the application file to receive the screen.
6. Click the Paste tool on the tool bar or choose Paste Screen from
the Edit menu.
7. PanelBuilder pastes the screen into the application file window
of the target application with the same name and number.
If the screen number exists in the target application, the screen is
assigned the next available number.
In the example below, the Feed Pump screen is moved from the
Sample to the Test application using the lowest available number.
Test
Moving Screens to
Another Application