Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 448)

Software Error and Warning Messages D–2
Publication 2711-6.0
Message What to do Meaning
Cannot load the Terminal Translate server PanelBuilder can’t load required files. Editing
the PB900.INI file can cause this error. Reboot computer and try again. If error
continues, re-install PanelBuilder.
Cannot locate data for tag: (tag name). Internal error. Check tag information. Contact A-B technical
support if error continues.
Cannot locate tag: (tag name) Internal error. Check tag information. Contact A-B technical
support if error continues.
Cannot open requested screen. Close open
screens to free additional resource memory. A low memory condition exists. Close open screens.
Cannot parse address for tag: (tag name). Internal error. Check tag information. Contact A-B technical
support if error continues.
Cannot print line. Failed to send a text string. This may be a
printer error. The printout is terminated. Check the Print Setup settings, Print Spooler
settings and the printer.
Cannot print text string. Failed to send a text string. This may be a
printer error. The printout is terminated. Check the Print Setup settings, Print Spooler
settings and the printer.
Cannot read the Terminal Catalog datafile. The CATALOG.DAT file is missing or
corrupted. This file stores the terminal type
that is selected when creating a new
application or changing the terminal type for
an application. Contact A-B technical support.
Cannot renumber text with same text ID. Same number was used to renumber a
message. Message numbers must be
unique. Select a different number or cancel operation.
Cannot shutdown print device. Print session couldn’t be terminated. Allow printout to complete.
Cannot translate unsaved applications. Can’t translate a .PBA file to a .PVA file until
the application is saved. Save the application with the default file name
or save with different file name.
Cannot write to error logfile
(PB550ERR.LOG). Error log file couldn’t be created. Cause
could be a full disk or write protect condition. Check available disk space or write
protection.
Cannot write to .INI, changes to editor
settings will not be saved. .INI file is either write protected or missing. Check file for possible access locks, such as
network access. PanelBuilder will continue.
Can’t delete project associated with current
application You can’t delete the project associated with
the current application. Reassign the current application to another
project, then delete the project.
Compressed file open failed:
(file name) Couldn’t open compressed application file
because of a full disk or write protect. Check disk space or write protection.
Compressed file write failed:
(file name) Couldn’t write compressed application file.
Cause may be full disk or write protect error. Check disk space or write protection.
Could not open (file name) for output! Couldn’t open temporary translation file
because of a full disk or write protect. Check disk space or write protection.
Could not retrieve PLC or Scanner data. The PLC/Scanner is not configured. From the Setup tab in the Terminal Setup
dialog, press the Comms. Setup button and
configure the PLC/Scanner type and name.
Could not retrieve terminal port data. PanelBuilder couldn’t find the terminal port
information necessary for download. From the Setup tab (Terminal Setup dialog),
press the Comms. Setup button to configure
terminal.
Could not retrieve terminal network data. PanelBuilder couldn’t find the network
information necessary for download. From the Setup tab (Terminal Setup dialog),
press the Comms. Setup button to configure
terminal.
Could not retrieve RIO network master data. PanelBuilder couldn’t find the RIO controller
information necessary for download. Check the RIO controller settings and retry.
Data format unknown for tag: (tag name). Internal error. Check tag information. Contact A-B support if
error continues.