Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 451)

Software Error and Warning Messages D–5
Publication 2711-6.0
Message What to do Meaning
No application open to associate project with. Tried to associate a project without opening
an application first. Open an application and try again.
No data on clipboard. Nothing on clipboard to paste. Cut or copy object before pasting.
No default printer.
Use Control Panel to install and select a
default printer. A default printer hasn’t been configured. See your Windows User’s Manual for details
on how to install and select printers.
No file ID record found: (file name) Internal error detected. Cause could be a
faulty disk drive or floppy disk. Try again. If error reoccurs, contact
Allen-Bradley technical support.
No memory card command specified for
download. Tried to download to a memory card without
specifying a memory card command. Select a memory card command and try to
download again.
No source file specified for upload. Upload requires a source file destination. Enter source file name before trying again.
Not enough memory to create tool bar.
Not enough memory to install tool bar.
Not enough memory to load bitmap.
Not enough memory to load popup menu. Low memory error. Close other applications and other open
screens. If the error reoccurs, exit Windows
and reboot your computer.
Not enough resource memory to open dialog. Low memory error. Close other applications and retry. If error
reoccurs, exit Windows, reboot , and retry.
Note: Applications created by this
demonstration version of PanelBuilder 900
will not be compatible with licensed versions. Application file created using a Demo release
of the configuration software will not be
supported by the released version. Recreate file with a released version of the
PanelBuilder Configuration Software.
Objects in application have touch cells
assigned. Edit object attributes before
changing application type to Non-Touch. When changing the terminal type from
touch/keypad to keypad only, you must
reassign touch cell objects to function keys. For each object, change touch cell input to
function key input, or delete the object.
Out of memory.
Close other applications and try again.
Otherwise, select cancel to quit. Attempt to allocate additional memory has
failed. Close other Window applications and retry. If
unsuccessful, PanelBuilder exits.
PanelView application size of (number) bytes
exceeds maximum size of (number) bytes.
You can eliminate some of the upload data
and try again. The application exceeds the allowable byte
size. Try to reduce byte size of application.
PanelView application warnings found.
Continue with download? Warnings found during validation. The application will download and run.
However, it may not operate as intended.
Correct the warnings and try again.
PanelView internal tag.
No parameters to edit. Edit Tag button was pressed for internal tag. You can’t edit internal tags.
Print manager failed. Error received from print manager (spooler). Check print spooler for possible errors.
Printer Initialization string can be at most 20
characters. The specified printer initialization string is too
long. Shorten the string to 20 or less characters.
Printer setup failed. Error occurred during printer setup. Check validity of print driver. Reload driver if
necessary.
Project already associated with current
application. Selected project is already associated with
the current application. None.
Project created for tags in application
being opened.
Project Name: A project doesn’t exist for the uploaded
application. PanelBuilder creates a project for the
application and fills in all the application tags.
Project does not exist. Selected project that doesn’t exist. Select another project name.
Project does not exist. Can’t associate. Associated application with a project name
that doesn’t exist. Select an existing project name to link with
the application or create a new project.
Project exists. Entered a project name that already exists. Enter another project name or use existing
project.