Digi NS9215 - Manual (Page 504)

T I M I N G
Memory Timing
504 Hardware Reference NS9215
I
2
C timing
All AC characteristics are measured with 10pF, unless otherwise noted.
The table below describes the values shown in the I 2 C timing diagram.
Standard Mode Fast Mode
Parm Description Min Max Min Max Unit
C1 iic_sda to iic_scl START hold time 4.0 0.6 µ
C2 iic_scl low period 4.7 1.3 µ
C3 iic_scl high period 4.7 1.3 µ
C4 iic_scl to iic_sda DATA hold time 0 0 µ
C5 iic_sda to iic_scl DATA setup tim 250 100 µ
C6 iic_scl to iic_sda STA 4.7 0.6 µ
C7 iic_scl to iic_sda STOP setup time 4.0 0.6 µ
C4 C 6 C 7
C 1 C 2
C 5
C 3
ii c_s da
ii c_ scl