Yaskawa MotionWorks+ Windows Software - Manual (Page 155)

MotionWorks+™ Block Reference
149
4 Active low input signal from S14 (CN1-44) Sigma_EXT1
5 Active low input signal from SI5 (CN1-45) Sigma_EXT2
6 Active low input signal from SI6 (CN1-46) Sigma_Latch_Input
7 Sets the signal to always enabled —
8 Sets the signal to always disabled —
D Active high input signal from SI4 (CN1-44) Sigma_EXT1
E Active high input signal from SI5 (CN1-45) Sigma_EXT2
F Active high input signal from SI6 (CN1-46) Sigma_Latch_Input
9 to F Sets the signal to always disabled —
Pn511.3 Settings
Setting Description MW+ I/O Name