Yaskawa MotionWorks+ Windows Software User Manual
Page 91
MotionWorks+™
Electronic Cam Tool
85
5. Cursor Position/Phase
Enter the phase value or set with the arrow buttons.
By clicking a point on the cam graph, the phase and position values at which the
mouse is pointing are displayed.
The X axis of the cam graph (1) shows the phase (master) value and the Y axis shows
the position (slave) value.
6. Cursor Position/Position
The position value corresponding to the phase value set in step 5 (above) is displayed.
7. Speed Data/Scale (Y-axis) Selection
Select the graph display type of the speed data graph (2).
By selecting the radio button from Actual Data and Rated Rotation Speed Ratio (%),
the speed control graph changes.
8. Acceleration Data/Scale (Y-axis) Selection
Select the graph display type of the acceleration data graph (3).
By selecting the radio button from Actual Data and Rated Torque Ratio (%), the accel-
eration control graph changes.
9. Data/Maximum Value
The maximum values of speed, acceleration and jerk are displayed.
10. Data/Cursor Positions
The speed, acceleration and jerk of the phase and position values at which the mouse is
pointing on the cam graph are displayed.