Yaskawa AC Drive Z1000 - Manual (Page 27)

1.3 Model Number and Nameplate Check
Please perform the following tasks after receiving the drive:
• Inspect the drive for damage.
If the drive appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the nameplate.
• If you have received the wrong model or the drive does not function properly, contact your supplier.
u Drive Nameplate
H
G
F
E
B
A PRG:
IND.CONT.EQ.
7J48
YASKAWA ELECTRIC CORPORATION Assembled in USA
: CIMR-Z
PASS
MODEL
INPUT
OUTPUT
MASS
O / N
S / N
REV :
: AC3PH 200-240V 50/60Hz 10.6A
: AC3PH 0-240V 0-240Hz 10.6A
: 5.6 kg
: 6W3050-2-100 VAJ123456
: J0073D207410100
2-1 Kurosaki-shiroishi, Yahatanishi-Ku, Kitakyushu 806-0004 Japan
D
□□□□
FRONT = IP20 AND TYPE1 FILE NO: E131457
BACKSIDE = IP20 AND TYPE12 C
C/C : CIMR-Z
A – Software version
B – Address
<1>
C – Enclosure type
D – Serial number
E – Lot number
F – Output specifications
G – Input specifications
H – AC drive model
Figure 1.1 Drive Nameplate Information Example
<1> The address of the head office of Yaskawa Electric Corporation (responsible for product liability) is shown on the nameplate.
CIMR - Z U 2 A 0021 F A A
Drive Z1000
Series
No.
Enclosure
Type
Design
Revision
Order
No.
Customized
Specifications
A Standard model
No.
Region
Code
U USA
IP00/
Open-Type
F
IP20/
NEMA
Type 1
A
No. Voltage Class
No.
Environmental
Refer to the following table
Specification
A Standard
3-phase, 200-240 Vac 2
3-phase, 380-480 Vac 4
1.3 Model Number and Nameplate Check
YASKAWA ELECTRIC TOEP C710616 45E YASKAWA AC Drive – Z1000 User Manual 27
1
Receiving