5 terminal cover, Models 2a0143 to 2a0396 and 4a0124 to 4a0590, Terminal cover – Yaskawa AC Drive Z1000 User Manual
Page 70
3.5 Terminal Cover
Follow the procedure below to remove the terminal cover for wiring and to reattach the terminal cover after wiring is complete.
u
Models 2A0143 to 2A0396 and 4A0124 to 4A0590
n
Removing the Terminal Cover
1.
Loosen the screws on the terminal cover, then pull down on the cover.
Note:
The terminal cover and the number of terminal cover screws differ depending on the drive model.
CAUTION! Do not completely remove the cover screws, just loosen them. If the cover screws are removed completely, the terminal
cover may fall off causing an injury.
Figure 3.11 Removing the Terminal Cover
2.
Pull forward on the terminal cover to free it from the drive.
Figure 3.12 Removing the Terminal Cover
3.5 Terminal Cover
70
YASKAWA ELECTRIC TOEP C710616 45E YASKAWA AC Drive – Z1000 User Manual