Yaskawa AC Drive Z1000 - Manual (Page 299)

<2> Available in drive software versions PRG: 1017 and later.
<3> Parameter setting value is not reset to the default value when the drive is initialized.
<4> Cycle power for setting changes to take effect.
<5> When setting F7-13 to 0, all IP addresses (F7-01 to F7-04) must be unique.
<6> When setting F7-13 to 0, also set parameters F7-01 to F7-12.
<7> When F7-14 is set to 0 or 2, be sure to also set F7-15.
B.6 F: Communication Option Parameters
YASKAWA ELECTRIC TOEP C710616 45E YASKAWA AC Drive – Z1000 User Manual 299
B
Parameter List