Clearing port statistics – Allied Telesis AT-S63 User Manual
Page 126
Advertising
Chapter 6: Port Parameters
126
Section I: Basic Features
Clearing Port Statistics
To clear the Ethernet port statistics and reset them to “0”, perform the
following procedure:
1. From the Main Menu, type 1 to select Port Configuration.
The Port Configuration menu is shown in Figure 26 on page 106.
2. From the Port Configuration menu, type 3 to select Port Statistics.
The Port Statistics menu is shown in Figure 32 on page 123.
3. Type 2 to select Clear Statistics.
The statistics are reset to “0” and the statistics gathering starts
again.
Advertising