Allied Telesis AT-S63 - Manual (Page 568)

Chapter 26: Encryption Keys
568 Section IV: Security
Importing an Encryption Key
Use the following procedure to import a public key from the AT-S62 file
system into the key management database. If a file contains both public
and private keys, only the public key is imported. The private key is
ignored.
Note
It is unlikely that you will ever need to perform this procedure for an
SSL public key. A switch can only use those SSL public keys that it
has generated itself.
This procedure starts from the Key Management menu. If you are unsure
how to display the menu, perform steps 1 to 3 in ”Creating an Encryption
Key” on page 559.
To import a public key, perform the following procedure:
1. From the Main Menu, type 8 to select Security Configuration.
The Security Configuration menu is shown in Figure 175 on page
559.
2. From the Security Configuration menu, type 3 to select
Keys/Certificate Configuration.
The Keys/Certificate Configuration menu is shown in Figure 176
on page 560.
3. From the Keys/Certificates Configuration menu, type 2 to select Key
Management.
The Key Management menu is shown in Figure 177 on page 560.
4. From the Key Management menu, type 5 to select Import Key From
File to import an RSA - Public key.