Allied Telesis AT-S63 - Manual (Page 536)

Chapter 24: Access Control Lists
536 Section IV: Security
Deleting an ACE
To delete an ACE, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 51.
2. From the System Administration menu, type 7 to select Management
ACL menu.
The Management ACL menu is shown in Figure 171 on page 532.
3. From the Management ACL menu, type 3 to select Delete
Management ACL Entry.
The following prompt is displayed:
Enter the IP Address:
4. Enter the IP address for the ACE you want to delete.
The AT-S63 management software prompts you to enter the specifics of
the ACE that you want to delete. (It can help to first display the contents
of the management ACL, using the procedure in ”Displaying the ACEs”,
next, and jot down on paper the IP address, mask, protocol, and
Interface information on the ACE you want to delete. In that way you will
have the information when the software prompts you for it.)