Allied Telesis AT-S63 - Manual (Page 370)

Chapter 18: SNMPv3
370 Section II: Advanced Features
6. Enter the Security Model configured for this User Name. You cannot
change the value of the Security Model parameter.
Select one of the following SNMP protocols:
1-v1
Select this value if this User Name is configured with the SNMPv1
protocol.
2-v2c
Select this value if this User Name is configured with the SNMPv2c
protocol.
3-v3
Select this value if this User Name is configured with the SNMPv3
protocol.
The following prompt is displayed:
Enter Storage Type [V-Volatile, N-NonVolatile]:
7. Select one of the following storage types for this table entry:
V - Volatile
Select this storage type if you do not want the ability to save an
entry in the SNMPv3 SecurityToGroup Table to the configuration
file. After making changes to an SNMPv3 SecurityToGroup Table
entry with a Volatile storage type, the S - Save Configuration
Changes option does not appear on the Main Menu.
N-NonVolatile
Select this storage type if you want the ability to save an entry in
the SNMPv3 SecurityToGroup Table to the configuration file. After
making changes to an SNMPv3 SecurityToGroup Table entry with
a NonVolatile storage type, the S - Save Configuration Changes
option appears on the Main Menu, allowing you to save your
changes. Allied Telesyn recommends this storage type.
8. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.