Allied Telesis AT-S63 - Manual (Page 205)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features 205
The System Utilities menu is shown in Figure 7 on page 58.
3. From the System Utilities menu, type 2 to select Downloads and
Uploads.
The Downloads and Uploads menu is shown in Figure 52 on page
187.
4. From the Downloads and Uploads menu, type 4 to select Upload a
File.
The following prompt is displayed:
Only TFTP uploads are available for a Telnet access
TFTP Server IP address:
5. Enter the IP address of the TFTP server.
The following prompt is displayed:
Remote File Name:
6. Enter the directory path where you want the system file stored on the
TFTP server along with a name for the file.
The following message is displayed:
Local File Name:
7. Enter the name of the system file on the switch that you want to
upload to the TFTP server. You can specify only one file. You cannot
use wildcards in the file name.
The following message is displayed:
Sending the file to Remote TFTP Server - Please wait ...
After the switch has uploaded the system file, the following
message is displayed:
File sent successfully!
The file is now stored on the TFTP server. You can now download
the file onto another AT-9400 Series switch in your network.