Configuring the snmpv3 notify table, Creating an snmpv3 notify table entry – Allied Telesis AT-S63 User Manual

Page 371

Advertising
background image

AT-S63 Management Software Menus Interface User’s Guide

Section II: Advanced Features

371

Configuring the SNMPv3 Notify Table

This section contains a description of the SNMPv3 Notify Table menu
and how to create, delete, and modify table entries. The Configure
SNMPv3 Notify Table menu allows you to define a name for sending
traps. For each Notify Name, you define if a trap or inform message ia
sent. The two message types, trap and inform, have different packet
formats.

For each Notify group, you can configure:

❑ Notify Name

❑ Notify Tag

❑ Notify Type

❑ Storage Type

The value of the Notify Tag is linked with the Tag List parameter in the
Configure SNMPv3 Target Address Table menu. As a result, the Notify
Tag parameter assigns a Target IP address to the Notify Table internally.

There are three functions you can perform with the Configure SNMPv3
Notify Table menu.

”Creating an SNMPv3 Notify Table Entry” on page 371

”Deleting an SNMPv3 Notify Table Entry” on page 373

”Modifying an SNMPv3 Notify Table Entry” on page 374

Creating an

SNMPv3 Notify

Table Entry

To create an entry in the SNMPv3 Notify Table menu, perform the
following procedure.

1. Follow steps 1 through 5 in the procedure described in ”Creating an

SNMPv3 User Table Entry” on page 328. Or, from the Main menu type
5->1->1->8->5.

The Configure SNMPv3 Table menu is shown in Figure 106 on
page 329.

2. From the Configure SNMPv3 Table menu, type 6 to select Configure

SNMPv3 Notify Table.

Advertising