Allied Telesis AT-S63 - Manual (Page 236)

Chapter 14: IGMP Snooping
236 Section II: Advanced Features
Configuring IGMP Snooping
To configure IGMP snooping on the switch, perform the following
procedure:
1. From the Main Menu, type 6 to select Advanced Configuration.
The Advanced Configuration menu is shown in Figure 69.
Figure 69. Advanced Configuration Menu
2. From the Advanced Configuration menu, type 1 to select IGMP
Snooping Configuration.
Note
Selection 2, RRP Snooping Configuration, is described in Chapter 15,
”RRP Snooping” on page 245.
The IGMP Snooping Configuration menu is shown in Figure 70.
Figure 70. IGMP Snooping Configuration Menu
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
Advanced Configuration
1 - IGMP Snooping Configuration
2 - RRP Snooping Configuration
R - Return to Previous Menu
Enter your selection?
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
IGMP Snooping Configuration
1 - IGMP Snooping Status ......... Disabled
2 - Multicast Host Topology ...... Single-Host/Port (Edge)
3 - Host/Router Timeout Interval . 260 seconds
4 - Maximum Multicast Groups ..... 64
5 - Multicast Router Port(s) ..... Auto Detect
6 - View Multicast Hosts List
7 - View Multicast Routers List
R - Return to Previous Menu
Enter your selection?