Allied Telesis AT-S63 - Manual (Page 156)

Chapter 8: Port Trunking
156 Section I: Basic Features
Displaying the Port Trunks
To display a port trunk, perform the following procedure:
1. From the Main Menu, type 1 to select Port Configuration.
The Port Configuration menu is shown in Figure 26 on page 106.
2. From the Port Configuration menu, type 4 to select Port Trunking.
The Port Trunking menu with a port trunk is shown in Figure 45.
Figure 45. Port Trunking Menu
The Port Trunking menu displays a table that contains the
following columns of information:
Trunk ID
ID number of the trunk.
Name
Trunk name.
Ports
The ports that are members of the trunk.
Method
The trunk’s load distribution method. The possible settings are:
SRC MAC - Source MAC address
DST MAC - Destination MAC address
SRC/DST MAC - Source address /destination MAC address
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
Port Trunking
ID Name Ports Method Status
------------------------------------------------------
2
Server 11 12-16 SRC/DST MAC UP
C - Create Trunk
D - Delete Trunk
M - Modify Trunk
R - Return to Previous Menu
Enter your selection?