Allied Telesis AT-S63 - Manual (Page 483)

AT-S63 Management Software Menus Interface User’s Guide
Section III: VLANs 483
5. Enter a port or a list of ports.
The Configure GVRP Port Settings menu is shown in Figure 151.
Figure 151. Configure GVRP Port Settings Menu
6. Type 1 to select Port Mode.
The following prompt is displayed:
Enter mode (0-Normal, 1-None): [0 to 1] -> 0
7. Type 0 to select Normal or 1 to select None. A setting of Normal
means the port processes and propagates GVRP information. This is
the default setting. A setting of None prevents the port from
processing GVRP information and from transmitting PDUs.
8. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
Configure GVRP Port Settings
Configuring Port 1-8
1 - Port Mode ............. Normal
R - Return to Previous Menu
Enter your selection?