Allied Telesis AT-S63 - Manual (Page 202)

Chapter 11: File Downloads and Uploads
202 Section I: Basic Features
Uploading a
System File
from a Local
Management
Session
To upload a system file to a workstation from a Telnet management
session using Xmodem or TFTP, perform the following procedure:
1. Establish a local management session on the switch where you want
to upload the system file.
2. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 51.
3. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 7 on page 58.
4. From the System Utilities menu, type 2 to select Downloads and
Uploads.
The Downloads and Uploads menu is shown in Figure 52 on page
187.
5. From the Downloads and Uploads menu, type 4 to select Upload a
File.
The following prompt is displayed:
Upload Method/Protocol [X-Xmodem, T-TFTP]:
6. To upload a system file using Xmodem, go to Step 7. To upload a file
using TFTP, do the following:
a. Type T.
The following prompt is displayed:
TFTP Server IP address:
b. Enter the IP address of the TFTP server.
The following prompt is displayed:
Remote File Name:
c. Enter the directory path where you want the system file stored
on the TFTP server and a name for the file.
The following message is displayed:
Local File Name:
d. Enter the name of the system file on the switch that you want
to upload to the TFTP server. You can specify only one file. You
cannot use wildcards in the file name.
The following message is displayed:
Sending the file to Remote TFTP Server - Please wait
...