Allied Telesis AT-S63 - Manual (Page 203)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features 203
After the switch has uploaded the system file, the following
message is displayed:
File sent successfully!
The file is now stored on the TFTP server. You can now
download the file onto another AT-9400 Series switch in your
network.
7. To upload a file using Xmodem, type X at the prompt displayed in
Step 5.
The following message is displayed:
Local File Name:
8. Enter the name of the system file on the switch that you want to
upload to your computer. You can specify only one file. You cannot
use wildcards in the file name.
The following prompt is displayed:
You are going to invoke the Xmodem download utility.
Do you wish to continue? [Yes/No]
Note: Please select 1K Xmodem protocol for faster
download.
Note
The transfer protocol must be Xmodem or 1K Xmodem.
9. Type Y for Yes.
The following message is displayed:
Use Hyper Terminal's 'Transfer/Receive File' option to
select Protocol
Note: Please select '1K Xmodem' protocol for faster
upload...
10. Begin the file transfer.
Steps 11 through 14 illustrate how you would upload a file using
the Hilgraeve HyperTerminal program.