Allied Telesis AT-S63 - Manual (Page 350)

Chapter 18: SNMPv3
350 Section II: Advanced Features
P-AuthPriv
This option represents authentication and the privacy protocol.
Select this security level to encrypt messages using a privacy
protocol and authenticate SNMP entities. This level provides the
greatest level of security. You can select this value if you
configured the Security Model parameter with the SNMPv3
protocol.
The following prompt is displayed:
Enter Read View Name:
7. Enter a value that you configured with the View Name parameter in
the SNMPv3 View Table.
A Read View Name allows the users assigned to this Group Name
to view the information specified by the View Table entry. This
value does not need to be unique.
The following prompt is displayed:
Enter Write View Name:
8. Enter a value that you configured with the View Name parameter in
the SNMPv3 View Table.
A Write View Name allows the users assigned to this Security
Group to write, or modify, the information in the specified View
Table. This value does not need to be unique.
The following prompt is displayed:
Enter Notify View Name:
9. Enter a value that you configured with the View Name parameter in
the SNMPv3 View Table.
A Notify View Name allows the users assigned to this Group Name
to send traps permitted in the specified View. This value does not
need to be unique.
The following prompt is displayed:
Enter Storage Type [V-Volatile, N-NonVolatile]:
10. Select one of the following storage types for this table entry:
V - Volatile
Select this storage type if you do not want the ability to save an
entry in the SNMPv3 Access Table to the configuration file. After
making changes to an SNMPv3 Access Table entry with a Volatile