Allied Telesis AT-S63 - Manual (Page 193)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features 193
Note
You cannot download AT-S63 software onto any type of enhanced
stacking switch other than AT-9400 Series switches.
The following prompt is displayed:
Do you want to show remote switch burning flash ->
[Yes/No]
6. You can respond with Yes or No to this prompt. It does not affect the
download.
The following prompt is displayed:
Do you want confirmation before downloading each switch
-> [Yes/No]
7. If you answer Yes to this prompt, the management software prompts
you with a confirmation message before upgrading a switch. If you
answer No, the management software does not display a
confirmation prompt before downloading.
The management software begins the download. The
management software notifies you when the download is
complete.
Caution
After a switch image file has been downloaded, the switch must
decompress it and write it to flash, a process that takes several
minutes to complete. Do not reset or power off the unit while it is
decompressing the file. After the file has been decompressed, the
switch automatically resets.