Allied Telesis AT-S63 - Manual (Page 23)

23
Preface
This guide contains instructions on how to configure an AT-9400 Series
Layer 2+ Gigabit Ethernet Switch using the AT-S63 management
software menus interface.
How This Guide is Organized
This manual is divided into four sections.
Section I: Basic Features
The chapters in this section explain how to start a local management
session and perform some basic tasks such as configuring switch and
port parameters, SNMPv1 and SNMPv2c, port trunking, and enhanced
stacking.
Section II: Advanced Features
The Advanced Features section includes procedures for working with
the file system, spanning tree, IGMP Snooping, SNMPv3, Quality of
Service, and the event log.
Section III: VLANs
The VLAN features of the AT-S63 management software described in this
section including port-based and tagged VLANs, multiple VLANs,
protected ports VLANs, and the GARP Protocol.
Section IV: Security
The chapters in this section explain how to use a wide variety of switch
security features including port security, management access control