Allied Telesis AT-S63 User Manual
Page 133
AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features
133
Choose one of the following display types.
1 - Display All
This selection displays all dynamic addresses learned on the ports
of the switch and all static addresses that have been assigned to
the ports. An example of a unicast MAC address table is shown in
Figure 37.
Figure 37. Display All Menu - Unicast MAC Addresses
Note
The first address in the unicast MAC address table is the address of
the switch.
A unicast MAC address table contains the following columns of
information:
MAC
The static or dynamic multicast MAC address.
Port
The port where the address was learned or assigned. The MAC
address with port 0 is the address of the switch.
VLAN ID
The ID number of the VLAN where the port is an untagged
member.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager
11:20:02 02-Oct-2004
Display All
Page 1
Total Number of MAC Addresses: 121
MAC Address
Port VLANID
Type
------------------------------------------------------------
01:80:C1:00:02:01
0
0
Static (fixed, non-aging)
00:a0:d2:18:1a:c8
1
1
Dynamic
00:a0:c4:16:3b:80
2
1
Dynamic
00:a0:12:c2:10:c6
3
1
Dynamic
00:a0:c2:09:10:d8
4
1
Dynamic
00:a0:33:43:a1:87
5
1
Dynamic
00:a0:12:a7:14:68
6
1
Dynamic
00:a0:d2:22:15:10
7
1
Dynamic
00:a0:d4:18:a6:89
8
1
Dynamic
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?