Allied Telesis AT-S63 - Manual (Page 592)

Chapter 27: PKI Certificates and SSL
592 Section IV: Security
6. Enter the name of the certificate you want to modify. (This field is case
sensitive.)
The Modify Certificate menu is shown in Figure 186.
Figure 186. Modify Certificate Menu
Note
You cannot change selection 1, Certificate Name.
7. Type 2 to select State. The possible settings are:
Trusted - This value indicates you have verified that the certificate
is from a trusted CA. This is the default.
Untrusted - This value indicates the certificate is from an
untrusted CA either because you have not verified the CA or you
have verified the CA is untrusted.
8. Type 3 to select Type. The possible settings are:
EE - The certificate was issued by a CA, such as VeriSign. This is the
default.
CA - The certificate belongs to a CA.
Self - This certificate is a self-signed certificate. The switch treats
this type of certificate as its own.
9. Type 4 to select Modify Certificate.
Your changes are implement in the certificate.
The following message is displayed:
Please wait while certificate is updated...Done.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
Modify Certificate
1 - Certificate Name................. Switch12
2 - State ........................... Trusted
3 - Type ............................ Self
4 - Modify Certificate
R - Return to Previous Menu
Enter your selection?