Uploading a system file – Allied Telesis AT-S63 User Manual
Page 201
AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features
201
Uploading a System File
You use the procedures in this section to upload a system file from a
switch to a computer or TFTP server. A system file can be any of the
following:
❑ Boot configuration file
❑ Public key
❑ PKI certificate
❑ Certificate enrollment request
Note
The certificate file, certificate enrollment request file, and key file are
supported only on the version of AT-S63 management software that
features SSL and PKI security.
This section contains the following two procedures:
❑ ”Uploading a System File from a Local Management Session” on
❑ ”Uploading a System File from a Telnet Management Session” on
Please note the following before you begin either procedure:
❑ You can upload a system file from either a local or Telnet
management session. You cannot perform this procedure from a
web browser management session.
❑ You can use either Xmodem or TFTP to upload a file from a local
management session.
❑ You must use TFTP to upload a file from a Telnet management
session.
❑ To use TFTP, there must be a node on your network that contains
TFTP server software.
❑ If you are using TFTP, you should start the TFTP server before you
begin the upload procedure.