Allied Telesis AT-S63 - Manual (Page 190)

Chapter 11: File Downloads and Uploads
190 Section I: Basic Features
status of the software download. The download process takes
several minutes to complete.
Figure 55. XModem File Send Window
Note
After the switch has downloaded the new image, it begins to
initialize the software, a process that takes approximately one
minute to complete. The switch does not forward any network
traffic during the initialization process. After the management
software is initialized, the switch automatically resets.
Downloading
the AT-S63
Image from a
Telnet
Management
Session
To download a new software image onto a switch from a Telnet
management session using TFTP, perform the following procedure:
1. Establish a Telnet management session on the switch where you
intend to download the new management software.
2. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 51.
3. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 7 on page 58.
4. From the System Utilities menu, type 2 to select Downloads and
Uploads.
The Downloads and Uploads menu is shown in Figure 52 on page
187.