Allied Telesis AT-S63 - Manual (Page 75)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features 75
The Configure System Hardware menu is shown in Figure 13.
Figure 13. Configure System Hardware Menu
This menu displays information about the current temperature
threshold on the switch.
4. Type 1 to select Temperature Threshold.
The following prompt is displayed:
Enter the temperature threshold -> [-25 to 73] ->
5. Enter a new threshold value.
6. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
Configure System Hardware
1 - Temperature Threshold (Celsius) .......... 73 C
R - Return to Previous Menu
Enter your selection?