Allied Telesis AT-S63 - Manual (Page 204)

Chapter 11: File Downloads and Uploads
204 Section I: Basic Features
11. From the HyperTerminal main window, select select Receive File
from the Transfer menu, as shown in Figure 59.
Figure 59. HyperTerminal Window
The Receive File window is shown in Figure 60.
Figure 60. Receive File Window
12. Click Browse and specify the location on your computer where you
want the system file stored.
13. Click in the Protocol field and select as the transfer protocol either
Xmodem or, for a faster download, 1K XModem.
14. Click Receive.
The switch uploads the file from the switch to your computer.
Uploading a
System File
from a Telnet
Management
Session
To upload a system file from the switch using a Telnet management
session and TFTP, perform the following procedure:
1. Establish a Telnet management session on the switch containing the
system file you want to upload to the TFTP server.
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 51.
2. From the System Administration menu, type 9 to select System
Utilities.