Allied Telesis AT-S63 - Manual (Page 248)

Chapter 15: RRP Snooping
248 Section II: Advanced Features
Enabling or Disabling RRP Snooping
To enable or disable RRP snooping on a switch, perform the following
procedure:
1. From the Main Menu, type 6 to select Advanced Configuration.
2. From the Advanced Configuration menu, type 2 to select RRP
Snooping Configuration.
The RRP Snooping Configuration menu is shown in Figure 73.
Figure 73. RRP Snooping Menu
3. Type 1 to toggle the setting between Enabled and Disabled. The
default setting is disabled.
A change to the status of RRP snooping is immediately activated
on the switch.
4. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
RRP Snooping Configuration
1 - RRP Snooping Status ............ Disabled
R - Return to Previous Menu
Enter your selection?