Resetting mstp to the defaults – Allied Telesis AT-S63 User Manual
Page 316
Advertising
Chapter 17: MSTP
316
Section II: Advanced Features
Resetting MSTP to the Defaults
To reset MSTP to the defaults, perform the following procedure:
1. From the Main Menu, type 3 to select Spanning Tree Configuration.
The Spanning Tree Configuration menu is shown in Figure 78 on
page 259.
2. From the Spanning Tree Configuration menu, type 3 to select
Configure Active Protocol.
The MSTP menu is shown in Figure 95 on page 294.
3. From the MSTP menu, type D to select Reset MSTP to Defaults.
The following message is displayed:
Do you want to reset MSTP configuration to default?
[Yes/No] ->
4. Enter Y for Yes or N for No and press Return.
The MSTP configuration is reset to the defaults.
Advertising