Allied Telesis AT-S63 - Manual (Page 155)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features 155
Deleting a Port Trunk
Caution
Disconnect the cables from the port trunk on the switch before
performing the following procedure. Deleting a port trunk without
first disconnecting the cables can create loops in your network
topology that result in broadcast storms and poor network
performance.
To delete a port trunk from the switch, perform the following procedure:
1. From the Main Menu, type 1 to select Port Configuration.
The Port Configuration menu is shown in Figure 26 on page 106.
2. From the Port Configuration menu, type 4 to select Port Trunking.
The Port Trunking menu is shown in Figure 42 on page 150.
3. From the Port Trunking menu, type D to select Delete Trunk.
The following prompt is displayed:
Enter Trunk ID: [1 to 6] ->
4. Enter the ID number of the trunk to be deleted.
The following prompt is displayed:
Are you sure you want to delete this trunk (Y/N)
[Yes/No] ->
5. Type Y for yes to delete the port trunk or N for no to cancel this
procedure.
The port trunk is deleted from the switch.
6. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.