Displaying the gvrp state machine – Allied Telesis AT-S63 User Manual
Page 494
Chapter 21: GARP VLAN Registration Protocol
494
Section III: VLANs
Displaying the GVRP State Machine
To display the GVRP state machine, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Configuration.
The VLAN Configuration menu is shown in Figure 135 on page
441.
2. From the VLAN Configuration menu, type 7 to select Configure GARP-
GVRP.
The GARP-GVRP menu is shown in Figure 149 on page 480.
3. From the GARP-GVRP menu, type O to select Other GVRP Parameters
menu.
The Other GVRP Parameters menu is shown in Figure 153 on page
485.
4. From the Other GVRP Parameters menu, type 4 to Display GVRP State
Machine.
The GVRP State Machine menu (page 1) is shown in Figure 158.
Figure 158. GVRP State Machine Menu (page 1)
5. Enter a VLAN ID.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager
11:20:02 02-Oct-2004
GVRP State Machine
Enter a VLAN ID for displaying the state machine: [1 to 4094] -> 1