Allied Telesis AT-S63 - Manual (Page 57)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features 57
Model Name
Model name of the AT-9400 Series switch. You cannot change this
setting.
Subnet Mask
Subnet mask assigned to the switch. To change the subnet mask,
see ”Configuring the IP Address, Switch Name, and Other Basic
Parameters” on page 51.
Serial Number
Serial number of the switch. You cannot change this setting.
Gateway
Gateway assigned to the switch. To change the gateway, see
”Configuring the IP Address, Switch Name, and Other Basic
Parameters” on page 51.
System Up Time
The number of days, hours, minutes, and seconds the switch has
been operational. You cannot change this setting.
Bootloader and Build Date
The version of the bootloader software and the date it was built.
Application and Build Date
The version of the AT-S63 management software that the switch
is currently running and the date it was built.
System Name
The name assigned to the switch. To change the name, see
”Configuring the IP Address, Switch Name, and Other Basic
Parameters” on page 51.
Administrator
The administrator of the switch. To change the administrator’s
name, see ”Configuring the IP Address, Switch Name, and Other
Basic Parameters” on page 51.
Location
The location of the switch. To change the location information,
see ”Configuring the IP Address, Switch Name, and Other Basic
Parameters” on page 51.
For information about selection H, System Hardware Status, refer
to ”Displaying and Setting System Hardware Information” on
page 73. For information about selection U, Uplink Information,
refer to ”Displaying Uplink Port Information” on page 76.