Allied Telesis AT-S63 - Manual (Page 492)

Chapter 21: GARP VLAN Registration Protocol
492 Section III: VLANs
Displaying the GIP Connected Ports Ring
To display the GIP connected ports ring, perform the following
procedure:
1. From the Main Menu, type 2 to select VLAN Configuration.
The VLAN Configuration menu is shown in Figure 135 on page
441.
2. From the VLAN Configuration menu, type 8 to select Configure GARP-
GVRP.
The GARP-GVRP menu is shown in Figure 149 on page 480.
3. From the GARP-GVRP menu, type O to select Other GVRP Parameters
menu.
The Other GARP Parameters menu is shown in Figure 153 on page
485.
4. From the Other GARP Port Parameters menu, type 3 to select Display
GIP Connected Ports Ring.
The GIP Connected Ports Ring menu is shown in Figure 157.
Figure 157. GIP Connected Ports Ring Menu
The GIP Connected Ports Ring menu displays the following
information:
GARP Application
Identifies the GARP application, that is, “GVRP.”
GIP Context ID
A number assigned to the instance for the GIP context.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
GIP Connected Ports Ring
GARP Application: GVRP
GIP Context ID: 0, STP ID: 0
------------------------------------------------------
4 -> 12 -> 18
U - Update Display
R - Return to Previous Menu
Enter your selection?