Clearing the event log – Allied Telesis AT-S63 User Manual
Page 217
Advertising
AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Features
217
Clearing the Event Log
You can clear the event log to remove old events and start fresh. To clear
the event log, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 51.
2. From the System Administration menu, type 8 to select Event Log.
The Event Log menu is shown in Figure 61 on page 209.
3. From the Event Log menu, type C to select Clear Log.
The following prompt is displayed:
Enter output to clear (T=Temporary, P=Permanent) ->
4. To clear the temporary event log, type T. To clear the permanent
event log, type P.
Advertising