Allied Telesis AT-S63 - Manual (Page 165)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features 165
Displaying the Port Mirror
To display the port mirror, perform the following procedure:
1. From the Main Menu, type 1 to select Port Configuration.
The Port Configuration menu is shown in Figure 26 on page 106.
2. From the Port Configuration menu, type 6 to select Port Mirroring.
The Port Mirroring menu is shown in Figure 48.
Figure 48. Port Mirroring Menu
The Port Mirroring menu provides the following information:
Enable/Disable
The port mirroring status, Enabled or Disabled.
Mirror-To (Destination) Port
The port that functions as the destination port.
Ingress (Rx) Mirror (Source) Port
The port(s) where ingress (received) traffic is mirrored.
Egress (Tx) Mirror (Source) Port
The port(s) where egress (transmitted) traffic is mirrored.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
Port Mirroring
1 - Enable/Disable ...................... Enabled
2 - Mirror-To (Destination) Port ........ 22
3 - Ingress (Rx) Mirror (Source) Ports .. 1,3
4 - Egress (Tx) Mirror (Source) Ports ... 11-13
R - Return to Previous Menu
Enter your selection?