Allied Telesis AT-S63 - Manual (Page 509)

AT-S63 Management Software Menus Interface User’s Guide
Section III: VLANs 509
11. If there are ports within the VLAN that still need to be assigned to a
group, the prompt in Step 8 is displayed again, showing the
unassigned ports. You must repeat Steps 9 and 10, creating
additional groups, until all of the ports in the VLAN have been
assigned to a group.
After you have created all of the groups, this prompt is displayed:
SUCCESS - Press any key to continue.
Press any key to continue.
The modified protected ports VLAN and its groups are now active
on the switch.
12. Press any key to return to the Configure VLANs menu.
13. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.