Allied Telesis AT-S63 - Manual (Page 616)

Chapter 28: Secure Shell (SSH)
616 Section IV: Security
Displaying SSH Information
To display SSH server information, perform the following procedure:
1. From the Main Menu, type 8 to select Security Configuration.
The Security Configuration menu is shown in Figure 175 on page
559.
2. From the Security Configuration menu, type 4 to select Secure Shell
(SSH).
The Secure Shell (SSH) menu is shown in Figure 192 on page 613.
3. From the Secure Shell (SSH) menu, type 6 to select Show Server
Information.
The Show Server Information menu is shown in Figure 193.
Figure 193. Show Server Information Menu
The Show Server Information menu provides the following
information:
Versions Supported
The versions of SSH which are supported by the AT-S63
management software.
Server Status
Whether or not the SSH server is enabled or disabled.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
Show Server Information
Versions Supported ....... 1.3, 1.5, 2.0
Server Status ............ Enabled
Server Port .............. 22
Host Key ID .............. 200
Host Key Bits ............ 1024
Server Key ID ............ 250
Server Key Expiry ........ 0 hours
Login Timeout ............ 180 seconds
Authentication Available . Password
Ciphers Available ........ 3DES, 128 bit AES, 192 bit AES,256 bit AES,
Arcfour (RC4)
MACs Available ........... hmac-sha1, hmac-md5
Data Compression ......... Available
R - Return to Previous Menu
Enter your selection?