Allied Telesis AT-S63 - Manual (Page 339)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Features 339
The Configure SNMPv3 View Table menu is shown in Figure 109.
Figure 109. Configure SNMPv3 View Table Menu
3. From the Configure SNMPv3 View Table menu, type 1 to select Create
SNMPv3 Table Entry.
The following prompt is displayed:
Enter View Name:
4. Enter a descriptive name of this View.
Enter a unique name of up to 32 alphanumeric characters.
Note
The “defaultViewAll” value is the default entry for the SNMPv1 and
SNMPv2c configuration. You cannot use the default value for an
SNMPv3 View Table entry.
The following prompt is displayed:
Enter View Subtree (OID format/Text Name):
5. Enter the subtree that this view will or will not be permitted to display.
You can enter either a numeric value in hex format or the
equivalent text name. For example, the OID hex format for TCP/IP
is:
1.3.6.1.2.1.6
The text format is for TCP/IP is:
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
Configure SNMPv3 View Table
View Name ................. internet
Subtree OID ............... 1.3.6.1
Subtree Mask ..............
View Type ................. Included
Storage Type .............. NonVolatile
Row Status ................ Active
1 - Create SNMPv3 Table Entry
2 - Delete SNMPv3 Table Entry
3 - Modify SNMPv3 Table Entry
U - Update Display
R - Return to Previous Menu
Enter your selection?