Allied Telesis AT-S63 - Manual (Page 454)

Chapter 19: Port-based and Tagged VLANs
454 Section III: VLANs
Note
You cannot delete the Default_VLAN, which has a VID of 1.
The Delete VLAN menu expands to contain all relevant
information about the VLAN, as shown in Figure 142.
Figure 142. Expanded Delete VLAN Menu
6. Type D to delete the VLAN or R to cancel the procedure.
If you select to delete the VLAN, the following confirmation
prompt is displayed:
Are you sure you want to delete this VLAN [Yes/No] ->
7. Type Y to delete the VLAN or N to cancel the procedure. Press Return.
If you select Yes, the VLAN is deleted and the following message
is displayed:
SUCCESS
Please make sure to manually delete any static
multicast MAC address(es) entries for this VLAN
Press any key to continue ...
All untagged ports in the deleted VLAN are returned to the
Default_VLAN as untagged ports.
Any static addresses assigned to the ports of the VLAN are now
obsolete, because the VLAN has been deleted. Those addresses
should be deleted from the MAC address table. For instructions
on how to delete addresses, refer to ”Deleting Unicast and
Multicast MAC Addresses” on page 138.
8. Press any key.
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Oct-2004
Delete VLAN
1 - VLAN Name .............. Sales
2 - VLAN ID (VID) .......... 3
3 - Tagged Ports ........... 7,9
4 - Untagged Ports ......... 20-24
D - Delete VLAN
R - Return to Previous Menu
Enter your selection?