Rockwell Automation 1398-DDM-xxx ULTRA 100 Series Drives Installation Manual - Manual (Page 165)

Publication 1398-5.2 – PDF 1997
Application and Configuration Examples 8-51
6. Choose OK to exit the PC Display Units dialog.
The modified units will be displayed where appropriate within the
ULTRA Master windows. For example, these changes cause the
Indexing tab in the Drive Parameters window to display:
●
Distance in Mtr Revs
●
Acceleration in Revs/sec
2
●
Deceleration in Revs/sec
2
The following units were not effected by the changes:
●
Dwell in msec
●
Velocity in RPM