Rockwell Automation 1398-DDM-xxx ULTRA 100 Series Drives Installation Manual - Manual (Page 211)

Publication 1398-5.2 – PDF 1997
Cable Diagrams, Schematics and Examples B-9
Figure B.7 J2 to 25-pin Terminal Block Kit Diagram (P/N 9101-1392)
Intro
Mounting bracket 0002-7068 (shown) and cable 9101-1371-003 (next page) supplied with kit.
NOTES:
The terminal block and cable provide a one-to-one transfer of the signals from the con-
nector to the respective pin(s) on the terminal block.
The cabling examples beginning on page B-24 depict the use of this kit to pass a cable
through a restricted bulkhead.