Local product support, Technical product assistance, Purpose and contents of this manual – Rockwell Automation 1398-DDM-xxx ULTRA 100 Series Drives Installation Manual User Manual
Page 19
Publication 1398-5.2 – PDF 1997
Preface
Intro-19
Local Product Support
Contact your local Allen-Bradley representative for:
●
sales and order support
●
product technical training
●
warranty support
●
support service agreements
Technical Product
Assistance
If you need to contact Rockwell Automation for technical assistance,
please review the information in the Troubleshooting chapter first.
Then call your local Allen-Bradley distributor. For the quickest
possible response, we recommend that you have the part and model
numbers and/or software revision level of your products available
when you call. The Rockwell Automation Technical Support number
is (216) 646-6800.
Purpose and Contents of this
Manual
This manual is a user guide for the ULTRA 100 Series. It gives you an
overview of the ULTRA 100 Series family and describes the
procedures you use to install, setup, use, and troubleshoot the
ULTRA 100 Series.
This manual provides instructions on how to setup and connect the
ULTRA 100 Series drive to a controlling device and a motor. A
ULTRA 100 Series drive can operate in one of several different
functional modes. The hardware connections necessary to run the
drive are detailed in this manual and basic software instructions are
provided for common setup procedures. For detailed explanation of
software instructions, refer to the comprehensive online instructions
available in the ULTRA Master software.
The instructions in this manual detail how to install your ULTRA 100
Series drive using ULTRA Master software with a personal computer.
If you are using a TouchPad device, abbreviated command titles are
displayed but the setup steps remain the same. If you are using the
serial Host Command Language to control the drive, comprehensive
instructions are accessible through the Host Command Reference icon
displayed in the ULTRA Master window.
This manual is organized into numbered chapters and alphabetical
appendices. The topics covered in each chapter and section are briefly
described. Typographical conventions, warning and cautions specific
to the drive, and complementary manuals are also described.
Title
Description
Lists general safety requirements that must be followed when
installing or servicing the drive.
Selecting Other System Components
Identifies motors and signal types that are compatible with
ULTRA 100 Series drives.
Provides snapshot instructions for installing, accessing and
exiting ULTRA Master.