Rockwell Automation 1398-DDM-xxx ULTRA 100 Series Drives Installation Manual - Manual (Page 248)

Publication 1398-5.2 – PDF 1997
C-16 TouchPad Instructions
TouchPad Options and Lists
TouchPad Lists
Table C.4: Option Selections for the TouchPad
DRVPARM TUNING
Parameter Options Parameter Options
AccelEn Enable/Disable SWEnable Enable/Disable
SlewEnab Enable/Disable
I OverRd Enable/Disable
STATUS CTLPANEL
Parameter Options Parameter Options
SWEnable Enable/Disable SWEnable Enable/Disable
EncAlign Normal/Align Start Normal/CtlPanel
RmvOfst to Rmv
Table C.5: Drive Communications Parameter List for the TouchPad
Display Parameter
00 7 Data Bits, 1 Stop Bit, Even Parity
01 7 Data Bits, 1 Stop Bit, Odd Parity
02 8 Data Bits, 1 Stop Bit, No Parity
03 8 Data Bits, 1 Stop Bit, Even Parity
04 8 Data Bits, 1 Stop Bit, Odd Parity
Table C.6: Baud Rate Parameter List for TouchPad
Display Parameter
00 1200 Baud
01 2400 Baud
02 4800 Baud
03 9600 Baud
04 19200 Baud
Table C.7: Encoder Output Parameter List for TouchPad
Display Parameter
÷ by 1 Divide Encoder counts by 1
÷ by 2 Divide Encoder counts by 2
÷ by 4 Divide Encoder counts by 4
÷ by 8 Divide Encoder counts by 8