Rockwell Automation 1398-DDM-xxx ULTRA 100 Series Drives Installation Manual - Manual (Page 27)

Publication 1398-5.2 – PDF 1997
Chapter 1
Safety
Chapter 1
Installing and Using the
ULTRA 100 Series Drive
Read the complete manual before attempting to install or operate the
drive. By reading the manual you will become familiar with practices
and procedures that allow you to operate the drive safely and
effectively.
You should always adhere to the “General Safety Guidelines” on
page 1-3. Specific Warnings and Cautions appear throughout the
manual.
Potential Hazards
The equipment described in this manual is intended for use in
industrial drive systems. This equipment can endanger life through
rotating machinery and high voltages, therefore it is essential that
guards for both electrical and mechanical parts are not removed.
Hazards which can be encountered in the use of this equipment are:
●
Electric Shock
●
Electric Fire
●
Mechanical
●
Stored Energy
These hazards must be controlled by safe machine design, using
specific local regulations, normal safety guidelines and the specific
notices that follow. There are no chemical or ionizing radiation
hazards.