Additional instructions and manuals, Host commands and ultramaster, Touchpad – Rockwell Automation 1398-DDM-xxx ULTRA 100 Series Drives Installation Manual User Manual
Page 22: Host commands and ultra master
Publication 1398-5.2 – PDF 1997
Intro-22
Preface
Additional Instructions and
Manuals
Host Commands and ULTRA Master
All ULTRA 100 Series drives are setup through serial Host
Commands. The drives can be configured directly through the Host
Command language or indirectly through the ULTRA Master
software. ULTRA Master is a graphical user interface that provides a
visual method of accessing the Host Command language through the
Microsoft Windows Operating System.
All documentation for both the Host Commands and ULTRA Master
is online. Host Command information is available through a
comprehensive online reference manual. ULTRA Master information
is available through Help menus. The online information provides in-
depth explanations of the Host Command language as well as the
menus, windows and dialog boxes that make ULTRA Master a
convenient method for programming ULTRA 100 Series drives.
To access the Host Command Reference
●
Click on the Host Command Reference icon in the
ULTRA Master program group.
To access ULTRA Master Help
●
Open ULTRA Master by clicking on the ULTRA Master icon in
the ULTRA Master group, and
●
Press the F1 key.
TouchPad
The optional TouchPad can be used to monitor and configure the
ULTRA 100 Series drive. The TouchPad command structure is similar
to the structure of ULTRA Master, but operates through an
abbreviated keypad interface. A TouchPad Instructions card is
provided with the TouchPad. It describes the installation and
operational instructions in a pocket-sized directory. The TouchPad
Command Tree card and additional instructions for the TouchPad are
included in the section titled “TouchPad Commands”, which begins
on page C-3. The TouchPad Command Tree card is a graphical
presentation of both the operational instructions and the command
structure for the ULTRA 100 Series drives. You may find it
convenient to refer to the TouchPad Command Tree card when using
the TouchPad with a ULTRA 100 Series drive.