Rockwell Automation 1398-DDM-xxx ULTRA 100 Series Drives Installation Manual - Manual (Page 249)

Publication 1398-5.2 – PDF 1997
TouchPad Instructions C-17
Table C.8: IO Mode Parameter List for TouchPad
Display
Parameter a
Inc Incremental Indexing
Abs Absolute Indexing
Reg Registration Indexing
a. Parameters available only if the drive supports Indexing.
Table C.9: Index Pointer Parameter List for TouchPad
Display Parameter a
00 Index 0
01 Index 1
02 Index 2
03 Index 3
04 Index 4
05 Index 5
06 Index 6
07 Index 7
08 RAM Index
a. Parameters available only if the drive supports Indexing.
Table C.10: Index Termination Parameter List for TouchPad
Display Parameter a
Stop Stop
NxtINow Start another Index immmediately
NxtIWt Start another Index at next Start Index transition
a. Parameters available only if the drive supports Indexing.
Table C.11: Home Type Parameter List for TouchPad
Display
Parameter
a
Sns/Mrk Home to Sensor, then to Marker
Marker Home to Marker
Sensor Home to Sensor
a. Parameters available only if the drive supports Indexing.
Table C.12: Homing Auto-Start Parameter List for TouchPad
Display
Parameter
a
Disable Auto-Start Homing inactive
Enb/Rst Auto-Start Homing if not already Homed
Enable Auto-Start on every Enable