Rockwell Automation 1398-DDM-xxx ULTRA 100 Series Drives Installation Manual - Manual (Page 197)

Publication 1398-5.2 – PDF 1997
Appendix A
Options and Accessories
Appendix A
ULTRA 100 Series drives conformance to the European Union
Directives is contingent on:
1. Installation of AC line filters between the power source and the
drive, and
2. Use of factory supplied cables to connect F-, H-, LD- N-, S-, W-
or Y-Series motors to a drive. Diagrams and schematics for all
Rockwell Automation cables are shown in Cable Diagrams, Sche-
matics and Examples, beginning on page B-1.
ULTRA 100 Series Drives
Fuses
Options and Accessories
Interface Cables
Diagrams and schematics for these cables are shown beginning on
page B-3.
Description
1398-DDM-005 500 Watt Universal Drive, single phase 100-240 VAC @ 50/60 Hz
1398-DDM-005X 500 Watt Universal Indexing Drive, single phase 100-240 VAC @ 50/60 Hz
1398-DDM-009 1000 Watt Universal Drive, single phase 100-240 VAC @ 50/60 Hz
1398-DDM-009X 1000 Watt Universal Indexing Drive, single phase 100-240 VAC @ 50/60 Hz
1398-DDM-019 2000 Watt Universal Drive, single phase 100-240 VAC @ 50/60 Hz
1398-DDM-019X 2000 Watt Universal Indexing Drive, single phase 100-240 VAC @ 50/60 Hz
1398-DDM-010 1000 Watt Universal Drive, single phase 100-240 VAC @ 50/60 Hz
1398-DDM-020 2000 Watt Universal Drive, single phase 100-240 VAC @ 50/60 Hz
1398-DDM-030 3000 Watt Universal Drive, single phase 100-240 VAC @ 50/60 Hz
1398-DDM-075 7500 Watt Universal Drive, single or three phase 100-240 VAC @ 50/60 Hz
Description Part Number
1 Ampere, fast acting, inline for 1398-DDM-010, -020, -030 or -075
(Littelfuse R451001, or equivalent) 0006-9071-001
Fuse for 1398-DDM-010, -020, -030 or -075 External Shunt Resistor
(Littelfuse CCMR-4.5 or equivalent) 0006-9070-001